Housing Versions
Housing Versions
Prosonic transmitters for mounting in the
field or control room are available with
different electronic housings.
•
Field operation.
The transmitter electronics are built into
an IP 66 housing. The transmitter is
parameterised via an operating unit with
a keyboard and display or – by using an
additional serial interface – with a
handheld terminal.
An external totaliser can also be
connected to the Prosonic FMU 861.
•
Control room operation
The operating unit is separated from the
transmitter electronics. A transmitter
with the serial interface can be
configured using a handheld terminal.
The operating unit is available for
mounting in a control cabinet
(144 mm x 144 mm) or for mounting in
an assembly rack (21 HP).
The transmitter electronics are mounted
in an IP 40 housing or else are on an
IP 10 mounting panel in the control
cabinet.
IP 66 protective housing
for wall or post mounting
21 TE
3H
E
144
Operating unit versions
•
Left:
The housing for
control panel mounting
•
Right:
The operating panel
for the assembly rack
Versions with separate
transmitter electronics
•
Left:
The IP 40 plastic
housing
•
Right:
The IP 10 mounting
plate
7
