Endress+Hauser Prosonic Flow 90, Руководство по эксплуатации

Страница: 57 / 114

Proline Prosonic Flow 90 5 Operation
Hauser 57
5.5.5 Device status / Error messages
You can read the extended device status, in this case, current error messages, via Command “48”.
The command delivers information which are partly coded in bits (see table below).
!
Note!
You can find a detailed explanation of the device status and error messages and their elimination on
Page 80 ff.!
Byte Bit Error no. Short error description (
→
Page 80 ff. )
0
0 001 Serious device error
1 011 Measuring amplifier has faulty EEPROM
2 012 Error when accessing data of the measuring amplifier EEPROM
3 not assigned –
4 not assigned –
5 not assigned –
6 not assigned –
7 not assigned –
1
0 not assigned –
1 not assigned –
2 not assigned –
3 not assigned –
4 not assigned –
5 not assigned –
6 not assigned –
7 not assigned –
2
0 not assigned –
1 081 Connection (downwards) sensor/transmitter interrupted
2 not assigned –
3 not assigned –
4 084 Connection (upwards) sensor/transmitter interrupted
5 not assigned –
6 not assigned –
7 not assigned –
3
0 not assigned –
1 not assigned –
2 not assigned –
3 111 Totalizer checksum error
4 121 The I/O- and the amplifier board are not compatible.
5 not assigned –
6 not assigned –
7 not assigned –