Endress+Hauser Proline t-mass 65 MODBUS RS485, Руководство пользователя

Страница: 50 / 62

SENSOR DATA Proline t-mass 65 MODBUS RS485
50 Hauser
MOUNTING SET LENGTH Prerequisite
This function is only available for insertion sensors (t-mass 65I).
Description
Use this function to enter a value for the length of the mounting set (including
the sensor compression fitting).
The unit is taken from the function UNIT LENGTH (

ä
10).
User input
5-digit floating-point number
75 to 900 (mm) or 2.953 to 35.433 (inch) (country dependent

ä
55)
Factory setting
106.0 (mm) or 4.173 (inch) (country dependent

ä
55)
The factory setting value is the length of the G1A compression fitting and
standard Hauser mounting boss.
MODBUS register:
Data type:
Access: 9635
Float
read/write
INSERTION DEPTH Prerequisite
This function is only available for insertion sensors (t-mass 65I).
Description
This function displays the calculated insertion depth for mounting the sensor.
The unit is taken from the function UNIT LENGTH (

ä
10).
For more information on insertion depth calculation, please refer to the
Operating Instructions BA00115D/06.
Display
5-digit floating-point number
MODBUS register:
Data type:
Access: 9637
Float
read
ZERO POINT Description
This function shows the current zero point correction value for the sensor. The
zero point is determined by the ZERO POINT ADJUST (

ä
38) function.
User input
5-digit floating-point number
–20.000 to +20.000
Factory setting
Depends on calibration.
MODBUS register:
Data type:
Access: 9624
Integer
read/write
FLOW CONDITIONER Description
Use this function to indicate if the t-mass 65F sensor has been calibrated with or
without a flow conditioner.
Display
0 = WITH
1 = WITHOUT
Factory setting
WITHOUT
MODBUS register:
Data type:
Access: 9626
Integer
read
CALIBRATION DATE Description
Use this function to display the date of the last factory calibration of the
measuring device.
This date is not updated by the IN-SITU CALIBRATION function.
Options
DD.MM.YYYY
MODBUS register:
Data type:
Access: 9641
String (16)
read/write
Function description, SENSOR DATA group