Proline Prowirl D 200
Installation
Hauser
21
Mounting kit
Mounting kit for disc (wafer version)
The centering rings supplied are used to mount and center the wafer-style devices.
A mounting kit comprises:
• Tie rods
• Seals
• Nuts
• Washers
1
2
3
A0019875
5
Mounting kit for wafer version
1
Nut, washer, tie rod
2
Seal
3
Centering ring (is supplied with the measuring device)
A mounting kit can be ordered separately (see the "Accessories" section
(Verweisziel existiert nicht, aber @y.link.required='true')
).
6.2.5
Mounting the transmitter of the remote version
!
CAUTION
Ambient temperature too high!
Danger of electronics overheating and housing deformation.
‣
Do not exceed the permitted maximum ambient temperature of +50 °C (+122 F).
‣
If operating outdoors: Avoid direct sunlight and exposure to weathering, particularly
in warm climatic regions.
!
CAUTION
Excessive force can damage the housing!
‣
Avoid excessive mechanical stress.
