Endress+Hauser Proline Prosonic Flow B 200, Руководство по эксплуатации

Страница: 34 / 36

Diagnostic information Proline Prosonic Flow B 200
34 Hauser
+
E
–
3 mm
XXXXXXXXXXXXX
WP CDI SIM
ON
OFF
A0013768
1. Loosen the securing clamp.
2. Unscrew the electronics compartment cover.
3. Pull out the display module with a gentle rotational movement.
4. To make it easier to access the lock switch, attach the display module to the edge of the
electronics compartment.
5. Setting the lock switch (WP) on the main electronics module to the ON position enables
the hardware write protection.
Ã
The symbol appears in the header of the measured value display and in the
navigation view in front of the parameters.
6. Feed the spiral cable into the gap between the housing and main electronics module and
plug the display module into the electronics compartment in the desired direction until it
engages.
7. Screw the electronics compartment cover closed and tighten the securing clamp.
10 Diagnostic information
Faults detected by the self-monitoring system of the measuring device are displayed as a
diagnostic message in alternation with the operational display. The message on the remedial
measures can be called up from the diagnostic messages, and contains important information on
the fault.