Endress+Hauser Proline Prosonic Flow 93C, Руководство по эксплуатации

Страница: 38 / 90

Operation Proline Prosonic Flow 93C FOUNDATION Fieldbus
38 Hauser
5.2.2 Display (operating mode)
The display area consists of three lines in all; this is where measured values are displayed, and/or
status variables (direction of flow, bar graph, etc.). You can change the assignment of display lines
to different variables to suit your needs and preferences (
→
see the "Description of Device
Functions" manual).
Multiplex mode:
A maximum of two different display variables can be assigned to each line. Variables multiplexed in
this way alternate every 10 seconds on the display.
Error messages:
Display and presentation of system/process errors
→
ä
42
a0001173
Fig. 25: Typical display for standard operating mode (HOME position)
1 Main line: shows the main measured values
2 Additional line: shows additional measured variables and status variables
3 Information line: shows additional information on the measured variables and status variables, e.g. bar graph
display
4 "Info icons" field: icons representing additional information on the measured values are shown in this field
→
ä
39
5 "Measured values" field: the current measured values appear in this field
6 "Unit of measure" field: the units of measure and time defined for the current measured values appear in this field
5.2.3 Additional display functions
In the HOME position, you can use the
O
/
S
keys to call up a list containing the following
information:
• Totalizers (including overflow)
• Tag name (DEVICE PD-TAG)
OS
→
Scan of individual values within the Info Menu
X
(Esc key)
→
Return to HOME position
1
4 5 6
2
3
+24.502
+1863.97
x
x
y
y
–50 +50
%
v
v
3
S