Endress+Hauser Proline Promass Q 500, Руководство по эксплуатации

Страница: 152 / 280

Operation Proline Promass Q 500 PROFIBUS PA
152 Hauser
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
Assign process variable – Select process variable for
totalizer. • Mass flow
• Volume flow
• Corrected volume
flow
• Target mass flow
*
• Carrier mass flow
*
Mass flow
Totalizer value 1 to n In the Assign process variable
parameter one of the following
options is selected:
• Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
• Condensate mass flow
• Energy flow
• Heat flow difference
Displays the current totalizer
counter value. Signed floating-point
number 0 kg
Totalizer status 1 to n – Displays the current totalizer
status. • Good
• Uncertain
• Bad –
Totalizer status (Hex) 1 to n In Target mode parameter,
the Auto option is selected.
Displays the current status
value (hex) of the totalizer. 0 to 0xFF –
* Visibility depends on order options or device settings
11.4.3 "Input values" submenu
The Input values submenu guides you systematically to the individual input values.
Navigation
"Diagnostics" menu → Measured values → Input values
‣
Input values
‣
Current input 1 to n →  152
‣
Status input 1 to n →  153
Input values of current input
The Current input 1 to n submenu contains all the parameters needed to display the
current measured values for every current input.
Navigation
"Diagnostics" menu → Measured values → Input values → Current input 1 to n
‣
Current input 1 to n
Measured values 1 to n →  153
Measured current 1 to n →  153