Endress+Hauser Proline Promass Q 500, Руководство по эксплуатации

Страница: 138 / 280

Commissioning Proline Promass Q 500 PROFIBUS PA
138 Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Separator A local display is provided. Select decimal separator for
displaying numerical values. • . (point)
• , (comma) . (point)
Backlight One of the following
conditions is met:
• Order code for "Display;
operation", option F "4-line,
illum.; touch control"
• Order code for "Display;
operation", option G "4-line,
illum.; touch control
+WLAN"
Switch the local display
backlight on and off. • Disable
• Enable Enable
* Visibility depends on order options or device settings
10.7.5 WLAN configuration
The WLAN Settings submenu guides the user systematically through all the parameters
that have to be set for the WLAN configuration.
Navigation
"Setup" menu → Advanced setup → WLAN Settings
‣
WLAN settings
WLAN IP address →  138
Security type →  138
WLAN passphrase →  138
Assign SSID name →  139
SSID name
→  139
Apply changes →  139
Parameter overview with brief description
Parameter Prerequisite Description User entry /
Selection
Factory setting
WLAN IP address – Enter IP address of the device
WLAN interface. 4 octet: 0 to 255 (in
the particular octet) 192.168.1.212
Security type – Select the security type of the
WLAN interface. • Unsecured
• WPA2-PSK WPA2-PSK
WLAN passphrase In the Security type
parameter, the WPA2-PSK
option is selected.
Enter the network key (8 to 32
characters).

The network key
supplied with the device
should be changed
during commissioning
for security reasons.
8 to 32-digit
character string
comprising numbers,
letters and special
characters Serial number of the
measuring device
(e.g. L100A802000)