Endress+Hauser Proline Promass Q 500, Руководство по эксплуатации

Страница: 108 / 280

Commissioning Proline Promass Q 500 PROFIBUS PA
108 Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Fail safe type – Select the failure mode. • Fail safe value
• Fallback value
• Off Off
Fail safe value In Fail safe type parameter,
the Fail safe value option is
selected.
Specify the values to be output
when an error occurs. Signed floating-point
number 0
* Visibility depends on order options or device settings
10.6.6 Displaying the I/O configuration
The I/O configuration submenu guides the user systematically through all the parameters
in which the configuration of the I/O modules is displayed.
Navigation
"Setup" menu → I/O configuration
‣
I/O configuration
I/O module 1 to n terminal numbers →  108
I/O module 1 to n information →  108
I/O module 1 to n type →  108
Apply I/O configuration →  108
Conversion code
→  108
Parameter overview with brief description
Parameter Description User interface / Selection /
User entry
Factory setting
I/O module 1 to n terminal numbers Shows the terminal numbers used by the I/O
module.
• Not used
• 26-27 (I/O 1)
• 24-25 (I/O 2) –
I/O module 1 to n information Shows information of the plugged I/O
module. • Not plugged
• Invalid
• Not configurable
• Configurable
• Fieldbus –
I/O module 1 to n type Shows the I/O module type. • Off
• Current output
*
• Current input
*
• Status input
*
• Pulse/frequency/switch
output
*
Off
Apply I/O configuration Apply parameterization of the freely
configurable I/O module. • No
• Yes No
Conversion code Enter the code in order to change the I/O
configuration. Positive integer 0
* Visibility depends on order options or device settings