Endress+Hauser Proline Promag L 800, Краткое руководство по эксплуатации

Страница: 13 / 56

Proline Promag L 800 Storage, transport and disposal of packaging
Hauser 13
"
Caution!
Note the following when transporting the device:
• Transport the measuring device to the measuring point in its original packaging.
• Do not remove protective covers or protection caps mounted on process connections.
They prevent mechanical damage to the sealing surfaces and fouling in the measuring pipe.
• Pay attention to the weight information on the packaging (adhesive label).
• Observe the transportation instructions on the adhesive label on the electronics compartment
cover.
• Do not lift the measuring device by the transmitter housing or the connection housing of the
remote version.
• Lifting tool
– Use webbing slings (avoid chains as these could damage the housing).
– For wood crates, the floor structure enables these to be loaded lengthwise or broadside
using a forklift.
• For measuring devices

DN 300 (12"): Using the webbing slings, lift the measuring device by
the process connections, not by the transmitter housing.
"
Caution!
Also note the following when transporting measuring devices

DN 300 (12"):
• Lift the measuring device by the flange using the metal brackets.
• If transporting by forklift, do not lift the sensor by the metal casing.
This would buckle the casing and damage the internal magnetic coils.
A0016257
Fig. 4: Transporting sensors with DN > 300 (12")
5.3 Disposing of the packaging
Detailed information on the disposal of packaging material:
Operating Instructions for the device on the enclosed CD-ROM