Endress+Hauser Proline Promag L 400 HART, Руководство по эксплуатации

Страница: 87 / 166

Proline Promag L 400 HART Commissioning
Hauser 87
Temperature unit
Parameter overview with brief description
Parameter Description Selection/ Factory setting
Volume flow unit Select the unit for volume
flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list Country-dependent:
• m
3 /h
• gal/min
Volume unit Select the unit for volume.
Result
The selected unit is taken
from:
Volume flow unit
Unit choose list Country-dependent:
• m
3
• gal
Conductivity unit Select the unit for
conductivity.
Result
The selected unit applies for:
– Current output
– Frequency output
– Switching output
– Simulation process
variable
Unit choose list m
S/cm
Mass flow unit Select the unit for mass flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list Country-dependent:
• kg/h
• lbs/min
Mass unit Select the unit for mass.
Result
The selected unit is taken
from:
Mass flow unit
Unit choose list Country-dependent:
• kg
• lbs
Density unit Select the unit for density.
Result
The selected unit applies for:
Fixed density
Unit choose list Country-dependent
• kg/l
• g/cc
Temperature unit Select the unit for
temperature.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list Country-dependent:
• °C (Celsius)
• °F (Fahrenheit)
10.5.3 Carrying out a sensor adjustment
The Sensor adjustment submenu contains parameters that pertain to the functionality of the
sensor.