Endress+Hauser Proline Promag H 200, Краткое руководство по эксплуатации

Страница: 43 / 48

Proline Promag H 200 Commissioning
Hauser 43
Pulse/frequency/switch output Configuring the selected output type
Display Configuring the measured value display
Output conditioning Defining the output conditioning
Low flow cut off Configuring the low flow cut off
10.5 Defining the tag name
To enable quick identification of the measuring point within the system, you can enter a unique
designation using the
Device tag parameter and thus change the factory setting.
Navigation path
Setup
®
Advanced setup
®
Device tag
10.5.1 Parameter overview with brief description
Parameter Prerequisite Description User entry Factory setting
Device tag The following option is selected
in the
Header parameter:
Device tag
Enter the name for
the measuring point. Max. 32 characters,
such as letters,
numbers or special
characters (e.g. @,
%, /) Promag
10.6 Protecting settings from unauthorized access
The following options exist for protecting the configuration of the measuring device from
unintentional modification after commissioning:
• Write protection via access code (
®
ä
43)
• Write protection via write protection switch (
®
ä
44)
• Write protection via keypad lock (
®
ä
39)
10.6.1 Write protection via access code
With the customer-specific access code, the parameters for the measuring device configuration
are write-protected and their values can no longer be changed via local operation.
Navigation path
"Setup" menu
®
Advanced setup
®
Define access code
Structure of the submenu
Define access code ®
Define access code
Confirm access code
Defining the access code via local display
1. Navigate to the Define access code parameter.
2. Define a max. 4-digit numeric code as an access code.
3. Enter the access code again to confirm the code.