Endress+Hauser Proline Promag 51, Руководство по эксплуатации

Страница: 53 / 124

Proline Promag 51 5 Operation
Hauser 53
5 Operation
5.1 Display and operating elements
The local display enables you to read all important parameters directly at the measuring point and
configure the device.
The display area consists of two lines; this is where measured values are displayed, and/or status
variables (direction of flow, partially filled pipe, bar graph, etc.). You can change the assignment of
display lines to variables at will in order to customize the display to suit your needs and preferences
(
→
see the “Description of Device Functions” manual).
A0001141
Liquid crystal display (1)
The backlit, two-line liquid crystal display shows measured values, dialog texts, error messages and information messages.
The display as it appears when normal measuring is in progress is known as the HOME position (operating mode).
Upper display line: Shows primary measured values, e.g. volume flow in [ml/min] or in [%].
Lower display line: Shows supplementary measured variables and status variables, e.g. totalizer reading in [m
3
],
bar graph, measuring point designation
Push buttons (2)
– Enter numerical values, select parameters
– Select different function groups within the function matrix
Press the +/
−
keys simultaneously to trigger the following functions:
– Exit the function matrix step by step
→
HOME position
– Press and hold down +/
−
keys for longer than 3 seconds
→
Return directly to HOME position
– Cancel data entry
Enter push button (3)
– HOME position
→
Entry into the function matrix
– Save the numerical values you input or settings you change
Esc
E
+
-
1
3 2
+48.25 xx/yy
+3702.6 x