Endress+Hauser Proline Promag 300, Описание параметров устройства

Страница: 65 / 272

Proline Promag 300 Modbus RS485 Description of device parameters
Hauser 65
Additional information Result
The defined unit is shown as an option in the choose list of the following parameters:
• Mass flow unit parameter (→  58)
• Mass unit parameter (→  59)
Example
If the text GLAS is entered, the following options are displayed in the picklist for the Mass
flow unit parameter (→  58):
• GLAS/s
• GLAS/min
• GLAS/h
• GLAS/d
Mass offset 
Navigation  Expert → Sensor → System units → User-spec. units → Mass offset (0562)
Description Use this function to enter the offset for adapting the user-specific mass unit and mass flow
unit (without time).
User entry Signed floating-point number
Factory setting 0
Additional information Description
Value in user-specific unit = (factor × value in base unit) + offset
Mass factor 
Navigation  Expert → Sensor → System units → User-spec. units → Mass factor (0561)
Description Use this function to enter a quantity factor (without time) for the user-specific mass and
mass flow unit.
User entry Signed floating-point number
Factory setting 1.0
Corr. vol. text 
Navigation  Expert → Sensor → System units → User-spec. units → Corr. vol. text (0592)
Description Use this function to enter a text for the user-specific unit of the corrected volume and
corrected volume flow. The corresponding time units (s, min, h, d) for mass flow are
generated automatically.