Endress+Hauser Proline Promag 300, Описание параметров устройства

Страница: 13 / 272

Proline Promag 300 Modbus RS485 Description of device parameters
Hauser 13
Options Description
CT act.-def.par.
(priority 3)

Only available for Promag H.
The DIP switch for custody transfer mode is activated on the PCB board. This locks
write access to the defined parameters (e.g. via local display or operating tool).

For detailed information on custody transfer mode, see the Special
Documentation for the device →  7
Temp. locked
(Priority 4) Write access to the parameters is temporarily locked on account of internal
processes running in the device (e.g. data upload/download, reset etc.). Once the
internal processing has been completed, the parameters can be changed once
again.
Access status
Navigation  Expert → Access status (0005)
Description Displays the access authorization to the parameters via the local display, Web browser or
operating tool.
User interface • Operator
• Maintenance
Factory setting Maintenance
Additional information Description
Access authorization can be modified via the Ent. access code parameter
(→  13).
If additional write protection is active, this restricts the current access authorization
even further.
Display
Detailed information on access authorization is provided in the "User roles and
associated access authorization" and "Operating concept" sections of the Operations
Instructions for the device →  7
Ent. access code
Navigation  Expert → Ent. access code (0003)
Description Use this function to enter the user-specific release code to remove parameter write
protection.
User entry 0 to 9 999