Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 99 / 216

Proline Cubemass C 300 Commissioning
Hauser 99
Switch-off value →  100
Switch-off delay →  100
Switch-on value →  100
Switch-on delay →  100
Failure mode →  100
Parameter overview with brief description
Parameter Prerequisite Description User interface /
Selection / User
entry
Factory setting
Terminal number – Shows the terminal numbers
used by the relay output
module. • Not used
• 24-25 (I/O 2)
• 22-23 (I/O 3) –
Relay output function – Select the function for the
relay output. • Closed
• Open
• Diagnostic
behavior
• Limit
• Flow direction
check
• Digital Output
Closed
Assign flow direction check The Flow direction check
option is selected in the Relay
output function parameter.
Select process variable for flow
direction monitoring. • Off
• Volume flow
• Mass flow
• Corrected volume
flow
*
Mass flow