Endress+Hauser PROFIBUS PA Levelflex FMP51, Краткое руководство по эксплуатации

Страница: 31 / 32

Levelflex FMP51, FMP52, FMP54 PROFIBUS PA Commissioning
Hauser 31
5. Setup → Tank type
 Select tank type.
6. Setup → Tube diameter (only for "Tank type" = "Bypass / pipe")
 Specify the diameter of the bypass or stilling well.
7. Setup → Tank level
 Specify the filling level ( Partially filled or Fully flooded )
8. Setup → Distance to upper connection
 In bypasses: Specify the distance from the reference point R to the lower edge of the
upper outlet; in all other cases, keep the factory setting
9. Setup → DC value
 Specify the dielectric constant of the upper medium
10. Setup → Empty calibration
 Specify the empty distance E (distance from the reference point R to the 0% mark).
11. Setup → Full calibration
 Specify the full distance F (distance from the 0% mark to the 100% mark).
12. Setup → Level
 Displays the measured level L
L
.
13. Setup → Interface
 Displays the interface height L
I
.
14. Setup → Distance
 Displays the distance D
L
between the reference point R and the level L
L
.
15. Setup → Interface distance
 Displays the distance D
I
between the reference point R and the interface L
I
.
16. Setup → Signal quality
 Displays the signal quality of the analyzed level echo.
17. Setup → Mapping → Confirm distance
 Compare the distance displayed with the actual value to start recording an
interference echo map.