Operation
Micropilot S FMR533 4 to 20 mA HART
32
Hauser
5.2.3
Key assignment
The operating elements are located inside the housing and are accessible for operation by opening
the lid of the housing.
Function of the keys
Custody locking switch
Access to the electronics can be prevented by means of a custody locking switch that locks the
device settings. The custody locking switch can be sealed for custody transfer applications.
Software reliability
The software used in the radar device Micropilot S fulfills the requirements of OIML R85.
This particularly includes:
• cyclical test of data consistency
• non-volatile memory
• segmented data storage
The radar device Micropilot S continuously monitor the compliance with accuracy requirements for
custody transfer measurements according to OIML R85. If the accuracy cannot be maintained, a
specific alarm is generated on the local display and via the digital communication.
Key(s)
Meaning
O
or
V
Navigate upwards in the selection list.
Edit numeric value within a function.
S
or
W
Navigate downwards in the selection list.
Edit numeric value within a function.
X
or
Z
Navigate to the left within a function group.
F
or
M
Navigate to the right within a function group.
O
and
F
or
S
and
F
Contrast settings of the LCD.
O
and
S
and
F
Hardware lock / unlock
After a hardware lock, an operation of the device via display or communication is not
possible! The hardware can only be unlocked via the display. An unlock parameter must be
entered to do so.
