Endress+Hauser Micropilot FMR67, Техническая информация

Страница: 81 / 84

Micropilot FMR67
Hauser V. 1, Rev. 3, 11-04-2017 81
Feature 010 Approval Feature 020 "Power Supply; Output"
A
1)
B
2)
C
3)
E
4)
/G
5)
K
6)
/L
7)
N3 NEPSI Ex d[ia] IIC T6 Ga/Gb, DIP A20/21 T85…90oC IP66 *
8)
*
8)
*
8)
*
8)
*
8)
8A FM/CSA IS+XP Cl.I,II,III Div.1 Gr.A-G *
8)
*
8)
*
8)
*
8)
-
1) 2-wire; 4-20mA HART
2) 2-wire; 4-20mA HART, switch output
3) 2-wire; 4-20mA HART, 4-20mA
4) 2-wire; FOUNDATION Fieldbus, switch output
5) 2-wire; PROFIBUS PA, switch output
6) 4-wire 90-253VAC; 4-20mA HART
7) 4-wire 10.4-48VDC; 4-20mA HART
8) in preparation
The nameplate indicates the Safety Instructions (XA) that are relevant to the device.
If the device is prepared for the remote display FHX50 (product structure: feature 030: Display,
Operation", option L or M), the Ex marking of some certificates changes according to the following
table
13)
:
Feature 010 ("Approval") Feature 030 ("Display, Operation") Ex marking
B3 L
1)
II 1/2 G Ex db [ia] IIC T6 Ga/Gb, II 1/2 D Ex ta [ia Db] IIIC Txx°C Da/Db
I3 L
2)
Ex db [ia] IIC T6 Ga/Gb, Ex ta [ia Db] IIIC Txx°C Da/Db
1) 4-wire 10.4-48VDC; 4-20mA HART
2) 4-wire 10.4-48VDC; 4-20mA HART
13) The marking of certificates not mentioned in this table are not affected by the FHX50.