Endress+Hauser Liquiline To Go CYM290, Руководство по эксплуатации

Страница: 38 / 64

Data Logger
Viewing the Logger Data
In the “Data logger” menu you can view the recorded entries either individually or as
curve characteristic (see examples).
1) Press Menu softkey.
2) Select “Data logger” using the arrows and confirm by pressing E.
3) Select “View logger data” using the arrows and confirm by pressing E.
4) Select filter (“Meas.point” or “Time + Meas.point” or “All values”).
5) Select the parameter corresponding to the sensor.
6) Press Menu softkey.
7) Select the desired entries using the arrow (see example 1).
8) For display as curve characteristic, press Graphic softkey.
You can use the arrows to navigate between entries (see example 2).
Deleting the Logger Data
To delete the recorded entries, proceed as follows:
1) Press Menu softkey.
2) Select “Data logger” using the arrows and confirm by pressing E.
3) Select “Delete logger data” using the arrows and confirm by pressing E.
4) Select deletion mode: “Complete”, “Data”, “Meas.point” or “Filter”
(you can filter for measuring point, parameter or time).
5) Press Delete softkey. The data are deleted according to the configuration.
6) Press Back softkey to return to menu selection.
Starting/Stopping the Data Logger
With the data logger activated, automatic switch-off is disabled.
Every time the meter has been switched off, the data logger must be restarted.
Depending on the assignment of the right softkey (see “Configuring the data
logger”), you can start/stop the data logger as follows:
Right softkey
Start/Stop logger 1) Press right softkey Start logger / Stop logger.
Hold value 1) Press Menu softkey.
2) Select “Data logger” using the arrows and
confirm by pressing enter.
3) Press Start or Stop softkey, resp.
38
pH Oxy Cond