Endress+Hauser Liquiline System CA80NO, Руководство по эксплуатации

Страница: 133 / 172

Liquiline System CA80NO Diagnostics and troubleshooting
Hauser 133
DIAG/Logbooks
Function Options Info
All data logbooks
Data logbook SP1
Absorption data logbook
Raw data logbook
Data logbook 1 ... 8
All event logbooks
Calibration logbook
Diagnostic logbook
Analyzer data logbook
Analyzer event logbook
Analyzer calibration
logbook
Configuration logbook
HW version logbook
Version logbook
Action,
commences as soon as the
option is selected Use this function to save the logbook to an SD
card.
‣
Save the logbook in the preferred file
format. You can then open the saved CSV
file on the PC in MS-Excel, for example, and
make further edits here. You can import the
FDM files into Fieldcare and archive them so
they are tamper-proof.

The file name consists of Logbook ident ( Menu / Setup / General settings / Logbooks ), an abbreviation for
the logbook and a time stamp.
1) CSV files use international number formats and separators. Therefore they must be imported into MS
Excel as external data with the correct format settings. If you double-click the file to open it, the data are
only displayed correctly if MS Excel is installed with the US country setting.
11.10 System information
DIAG/System information
Function Options Info
Device tag Read only Individual device tag → General
settings
Order code Read only You can order identical hardware
with this code.
This code changes on account of
changes to the hardware and you
can enter the new code you received
from the manufacturer here
1)
.

To establish the version of your device, enter the order code into the search screen at the following
address:
www.endress.com/order-ident
Orig. order code ext. Read only Complete order code for the original
device, resulting from the product
structure.
Current order code ext. Read only Current code, taking into account
changes to the hardware. You must
enter this code yourself.
Serial number Read only The serial number allows you to
access device data and
documentation on the Internet:
www.endress.com/device-viewer
Software version Read only Current version
Measuring parameter Read only Set measuring parameter
MPL version Read only Current version
Actuator control module Read only
• Firmware version
• Hardware version
Photometer Read only
• Firmware version
• Hardware version