Endress+Hauser Liquiline CA80FE, Краткое руководство по эксплуатации

Страница: 40 / 44

Commissioning Liquiline System CA80FE
40 Hauser
• Device tag
Give your device any name of your choice (max. 32 characters).
• Set date
Correct the set date if necessary.
• Set time
Correct the set time if necessary.
2. Insert the bottles and activate the bottles used in the menu: Bottle insertion / Bottle
selection .
3. Check the concentration of the calibration standard used: Calibration / Settings /
Nominal concentration .
4. Optionally, also change the measuring interval: Measurement / Measuring interval .
 All the other settings can be left in the default factory settings for the time being.
5. Return to the measuring mode: press and hold the soft key for ESC for at least one
second.
 Your analyzer now works with your general settings. Optionally connected sensors
use the factory settings of the specific sensor type and the individual calibration
settings that were last saved.
If you want to already configure additional input and output parameters in the Basic setup
analyzer :
‣
Configure the current outputs, relays, limit switches and device diagnostics with the
following submenus.