Endress+Hauser iTEMP TMT85 Скачать руководство пользователя страница 10

Страница: 10 / 100

Incoming acceptance and product identification

iTEMP TMT85

Hauser

3.2.2

Name and address of manufacturer

Name of manufacturer:

Hauser Wetzer GmbH + Co. KG

Address of manufacturer:

Obere Wank 1, D-87484 Nesselwang or

www.endress.com

Address of manufacturing plant:

See nameplate

3.3

Scope of delivery

The scope of delivery of the device comprises:

• Temperature transmitter

• Mounting material, optional

• Hard copy of multi-language Brief Operating Instructions

• Additional documentation for devices which are suitable for use in the hazardous area

(ATEX, FM, CSA)

3.4

Certificates and approvals

The device complies with the requirements of the standards EN 61 010-1 "Safety

Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use" and

with the EMC requirements as per the IEC/EN 61326 series.

3.4.1

CE/EAC mark, Declaration of Conformity

The device meets the legal requirements of the EU/EEU guidelines. The manufacturer

confirms that the device is compliant with the relevant guidelines by applying the CE/EAC

mark.

3.4.2

FOUNDATION Fieldbus

certification

The temperature transmitter successfully passed all tests and is certified and registered by

the Fieldbus Foundation. The device meets all the requirements of the following

specifications:
• Certified in accordance with FOUNDATION Fieldbus

specification

• FOUNDATION Fieldbus

• Interoperability Test Kit (ITK), (device certification number available on request): The

device can also be operated with certified devices of other manufacturers

• Physical Layer Conformance Test of the Fieldbus FOUNDATION

An overview of other approvals and certifications is provided in the "Technical data" section

→  50.

3.5

Storage and transport

Carefully remove all the packaging material and protective covers that are part of the

transported package.

Dimensions and operating conditions: →  61
When storing (and transporting) the device, pack it so that it is reliably protected

against impact. The original packaging offers the best protection.

Storage temperature

–40 to +100 °C (–40 to +212 °F)

Содержание iTEMP TMT85





































































































Результаты поиска

Содержание iTEMP TMT85

Отзывы:

Похожие инструкции для iTEMP TMT85

Бренды по названию

Популярные бренды

Endress+Hauser iTEMP TMT85, Руководство по эксплуатации

Результаты поиска

Содержание iTEMP TMT85

Отзывы:

Похожие инструкции для iTEMP TMT85

Бренды по названию

Популярные бренды