Endress+Hauser iTEMP TMT84, Краткое руководство по эксплуатации

Страница: 39 / 40

TMT84 Operation and commissioning
Hauser
39
5.5 Switching on the head transmitter
Once the final checks have been successfully completed, it is time to switch on the supply
voltage. The head transmitter performs a number of internal test functions after power-up. As
this procedure progresses, the following sequence of messages appears on the display:
The device begins normal operation after approx. 8 seconds, the attached display after
approx. 12 seconds. Normal measuring mode commences as soon as the switch-on procedure
is completed. Various measured values and/or status values appear on the display.
For a more detailed temperature transmitter configuration description and further information,
please refer to the Operating Instructions on the CD-ROM provided.
Step Display
1 Display name and software (SW) and hardware (HW) version
2 Company logo
3a Device name as well as the SW, HW and device release of the head transmitter
3b Displays sensor configuration
4a Current measured value or
4b Current status message
!
Note!
If the switch-on procedure fails, the appropriate status message is displayed, depending on the cause. A
detailed list of the status messages, as well as the measures for troubleshooting, can be found in the
Operating Instructions on the CD-ROM.