Endress+Hauser iTEMP TMT71, Руководство по эксплуатации

Страница: 28 / 96

Operation options iTEMP TMT71
28 Hauser
Submenus
Menu Typical tasks Content/meaning
"Diagnostics" Troubleshooting:
• Diagnosing and eliminating process errors.
• Error diagnostics in difficult cases.
• Interpretation of device error messages and
correcting associated errors.
Contains all parameters for detecting and analyzing errors:
•
Diagnostic list
Contains up to 3 error messages currently pending
• Event logbook
Contains the last 10 error messages
• "Simulation" submenu
Used to simulate measured values, output values or diagnostic
messages
• "Diagnostic settings" submenu
Contains all the parameters for configuring error events
• "Min/max values" submenu
Contains the minimum/maximum indicator and the reset option
"Application" Commissioning:
• Configuration of the measurement.
• Configuration of data processing (scaling,
linearization, etc.).
• Configuration of the analog measured value output.
Tasks during operation:
Reading measured values.
Contains all parameters for commissioning:
•
"Measured values" submenu
Contains all the current measured values
• "Sensor" submenu
Contains all the parameters for configuring the measurement
• "Output" submenu
Contains all the parameters for configuring the analog current output
"System" Tasks that require detailed knowledge of the system
administration of the device:
• Optimum adaptation of the measurement for
system integration.
• Detailed configuration of the communication
interface.
• User and access administration, password control
• Information for device identification and display
configuration
Contains all the higher-level device parameters that are assigned for
system, device and user management, including Bluetooth
configuration.
•
"Device management" submenu
Contains parameters for general device management
• "Bluetooth configuration" submenu (option)
Contains the function for enabling/disabling the Bluetooth interface
• "Device and user management" submenus
Parameters for access authorization, password assignment, etc.
• "Information" submenu
Contains all the parameters for the unique identification of the device
• "Display" submenu
Configuration of the display
6.3 Access to the operating menu via the operating tool
6.3.1 DeviceCare
Function scope
DeviceCare is a free configuration tool for Hauser devices. It supports devices with
the following protocols, provided a suitable device driver (DTM) is installed: HART,
PROFIBUS, FOUNDATION Fieldbus, Ethernet/IP, Modbus, CDI, ISS, IPC and PCP. The target
group comprises customers without a digital network in plants and service centers as well
as Hauser service technicians. The devices can be connected directly via a modem
(point-to-point) or a bus system. DeviceCare is fast, easy and intuitive to use. It can run on
a PC, laptop or tablet with a Windows operating system.
Source for device description files
See information →  32
6.3.2 FieldCare
Function scope
FDT/DTM-based plant asset management tool from Hauser. It can configure all
smart field units in a system and helps you manage them. By using the status information,