Endress+Hauser Hart Cerabar PMP71B Скачать руководство пользователя страница 8

Страница: 8 / 84

About this document

Cerabar PMP71B HART

Hauser

Example:

• Sensor: 10 bar (150 psi)

• Upper range limit (URL) = 10 bar (150 psi)

• Calibrated/adjusted span: 0 to 5 bar (0 to 75 psi)

• Lower range value (LRV) = 0 bar (0 psi)

• Upper range value (URV) = 5 bar (75 psi)

URL

|URV

LRV|

In this example, the TD is 2:1. This span is based on the zero point.

1.5

Documentation

All available documents can be downloaded using:

• the serial number of the device (see cover page for description) or

• the data matrix code of the device (see cover page for description) or

• the "Downloads" area of the website

www.endress.com

1.5.1

Supplementary device-dependent documentation

Additional documents are supplied depending on the device version ordered: Always

comply strictly with the instructions in the supplementary documentation. The

supplementary documentation is an integral part of the device documentation.

1.6

Registered trademarks

HART®

Registered trademark of the FieldComm Group, Austin, Texas, USA

Bluetooth®

The Bluetooth® wordmark and logos are registered trademarks of Bluetooth SIG, Inc. and

any use of these trademarks by Hauser is licensed. Other trademarks and trade

names are those of their respective owners.

Apple®

Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in

the U.S. and other countries. App Store is a service mark of Apple Inc.

Android®

Android, Google Play and the Google Play logo are trademarks of Google Inc.

Содержание Hart Cerabar PMP71B





















































































Результаты поиска

Содержание Hart Cerabar PMP71B

Отзывы:

Похожие инструкции для Hart Cerabar PMP71B

Бренды по названию

Популярные бренды

Endress+Hauser Hart Cerabar PMP71B, Руководство по эксплуатации

Результаты поиска

Содержание Hart Cerabar PMP71B

Отзывы:

Похожие инструкции для Hart Cerabar PMP71B

Бренды по названию

Популярные бренды