1
General Information
1.1
Symbols used
Warning:
This symbol alerts to hazards which
may cause serious injuries as well as
damage if ignored.
Caution:
This symbol alerts to possible mal-
functions due to operator error.
Note:
This symbol indicates important
items of information.
1.2
Unpacking
Inspect for any damaged packaging or
damaged contents. Inform the post office or
freight carrier of any damage. Damaged
goods must be stored until the matter has
been settled.
Check that the delivery is complete and
agrees with the shipping documents. Check
product type and version on the
nameplate against your order.
The delivery includes:
• FlowFit P CPA 240 assembly
• Operating Instructions BA 179C/07/en.
If you have any questions, consult your
supplier or E Hauser sales office
(see back page of this operating instructions
for addresses).
1.3
Intended use
The FlowFit P CPA 240 is intended for the fit-
ting of pH, redox or temperature sensors in pi-
pes. The assembly version is designed for
universal use in drinking water, feedwater and
waste water environments and in chemical in-
dustry.
1.4
Safety notes
Warning:
•
The notes and warnings in these
operating instructions must be
strictly adhered to!
•
Faults on the assembly may only
be remedied by authorised and
properly trained personnel.
•
If faults cannot be remedied, the
assembly must be removed from
service and secured to prevent
accidental start-up.
1 General Information
FlowFit P CPA 240
2
Hauser
