Seite 6/7
The IP address must be without leading zeros!
The Com-Server saves the IP address not until a connection via Telnet
Æ
Æ
Æ
Æ
Chapter 2: COM-Server settings!
With older versions of Windows it can be necessary, to ping an other
network station before using the ARP command!
1.2. Assigning via RS232
-
Switch off the COM-Server
-
Connect it to your PC with a crossed cable. It is included in delivery of
RSG10(20)A-E2 and RSG10(20)-E3.
-
Using a terminal program, e.g. “HyperTerminal“ or WinSer32 transmit
x
(9600,8,1,N)
and switch the COM-server on. It will send
IP no. + > <ENTER> :
-
Enter the IP address (without leading zeros). Once it has accepted the address the COM-
Server transmits the entered address back.
2.
COM-Server settings
-
Please connect the COM-Server to your PC-network
-
Run from
Start
Æ
Æ
Æ
Æ
Run
the command line
Telnet [IP-Adresse] 1111
-
Setup System – Setup TCP/IP
-
Set up subnet mask and adress of gateway
-
Setup Port – UART Setup
-
Set up interface parameters to match those of the connected unit and set handshake to
NONE (no handshake)
-
SAVE Setup
