Cerabar S 4 to 20mA HART
Description of parameters
Hauser
27
SEAL TYPE (362)
Options
For selecting and displaying the material of the process seal.
Options:
• Not used
• Unknown
• Special
• FKM Viton
• NBR
• EPDM
• Urethane
• IIR
• Kalrez
• FKM Viton oxyg
• CR
• MVQ
• PTFE glass
• PTFE graphite
• PTFE oxygen
• Copper
• Copper f. oxygen
Factory setting:
As per order specifications
BOLTS MATERIAL
For selecting and displaying the material of the bolts.
Prerequisite:
• Digital communication
NUTS MATERIAL
For selecting and displaying the material of the nuts.
Prerequisite:
• Digital communication
DRAIN VENT MAT.
For selecting and displaying the material of the vent valves.
Prerequisite:
• Digital communication
DRAIN VENT POS.
For selecting and displaying the position of the vent valves.
Prerequisite:
• Digital communication
THREAD PROCESS
For selecting and displaying the process connection thread.
Prerequisite:
• Digital communication
MOUNTING THREAD
For selecting and displaying the ways of securing the device.
Prerequisite:
• Digital communication
REMOTE SEAL +
For selecting and displaying the diaphragm seal type on the positive side.
Prerequisite:
• Digital communication
REMOTE SEAL -
For selecting and displaying the diaphragm seal type on the negative side.
Prerequisite:
• Digital communication
DIAPHRAG. MAT. +
For selecting and displaying the diaphragm material on the positive side
Prerequisite:
• Digital communication
DIAPHRAG. MAT. -
For selecting and displaying the diaphragm material on the negative side.
Prerequisite:
• Digital communication
NR OF REMOTE SE
For selecting and displaying the number of diaphragm seals.
Prerequisite:
• Digital communication
Table 10: (GROUP SELECTION
) OPERATING MENU
TRANSMITTER INFO
PROCESS CONNECTION
Parameter name
Description