Endress+Hauser Cerabar M Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 92

background image

Cerabar M, Deltapilot M

Operation

Hauser

41

6.5

Operation using Hauser operating program

The FieldCare operating program is an Hauser asset management tool based on

FDT technology. With FieldCare, you can configure all Hauser devices as well as

devices from other manufacturers that support the FDT standard.
Hardware and software requirements can be found on the Internet:
www.de.endress.com → Search: FieldCare → FieldCare → Technical data.

FieldCare supports the following functions:

• Configuration of transmitters in online/offline mode

• Documentation of the measuring point

• Offline parametrization of transmitters

Connection options:

FieldPort SFP20

• The configuration data can be uploaded to the DTM with the upload function, modi-

fied in the DTM and then downloaded to the download (FDT upload/download).

• More information about FieldCare is available on the Internet

(

http://www.de.endress.com

, Download, → Search for: FieldCare).

6.6

Locking/unlocking operation

Once you have entered all the parameters, you can lock your entries against unauthorized

and undesired access.
Locked operation is indicated as follows:

• By the

symbol on the local display

• The parameters are grayed out in FieldCare and the handheld terminal, which means

they cannot be edited. Information displayed in the "" parameter.

Parameters which refer to how the display appears, e.g. "Language ", can still be altered.
The "Operator code" parameter is used to lock and unlock the device.

Operator code (021)

Write permission

Operators/Service engineers/Expert

Description

Use this function to enter a code to lock or unlock operation.

User entry

• To lock: Enter a number ≠ the release code (value range: 1 to 9999).

• To unlock: Enter the release code.

Note

The release code is "0" in the order configuration. Another release code can be defined in

the "Code definition" (023) parameter. If the user has forgotten the release code, the

release code can be visible by entering the number "5864".

Factory setting

0

«
...
39
40
41
42
43
...
»

Содержание Cerabar M





























































































Отзывы:

Нет отзывов

Похожие инструкции для Cerabar M

Бренд: OHAUS Страницы: 32

Бренд: RADWAG Страницы: 12

Бренд: Raymarine Страницы: 42

Бренд: Sanmenxia Страницы: 17

Бренд: SANKO Страницы: 25

Бренд: Samson Страницы: 2

Clavinova CVP-601

Бренд: Yamaha Страницы: 98

Бренд: Yamaha Страницы: 28

Бренд: PCB Piezotronics Страницы: 16

fieldscout TDR 100

Бренд: Spectrum Techniques Страницы: 20

OPTIFLUX 4040 C Series

Бренд: KROHNE Страницы: 20

Бренд: Hanna Instruments Страницы: 2

Бренд: Eno Scientific Страницы: 47

Бренд: A&D Страницы: 24

Бренд: UEi Страницы: 5

Бренд: Anglerfish Creative Lighting Страницы: 15

Бренд: Vega Страницы: 36

Бренд: Haltech Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды