Identification
CE 4
6
Hauser
2
Identification
2.1
Device designation
2.1.1
Legend plate
Compare the legend plate on the unit with the following figure:
Fig. 1:
Legend plate entries for the measurement station (example)
Pos. 1: Order code and series number for the measurement station
Pos. 2: Commission number
Pos. 3: Power supply
Pos. 4: Power consumption
2.2
Delivery
Please check the consignment for complete delivery by comparing the delivery note
and your order:
•
Unit type and model from the legend plate
•
Operating instructions (see sections 5, 6, 7, 8 in the ring binder)
•
Measurement station accessories (see chapter 8 "Accessories" )
The measurement station is built either exactly to the order code or tailored to customer
requirements. This means that each unit delivered will be different:
•
Analysis system
•
ASP-Station 2000 water sampler
•
CE 4 operating instructions
•
ASP-Station 2000 operating instructions
•
CE 4 technical instructions
•
Operating instructions and certificates for the indidual units and components fitted
•
Accessories that have been ordered under the same order number
2.2.1
Identification lists
The identification list for this measurement station can be found in section 1 in the ring
binder. In this section, all individual components are listed including order code and unit
numbers.
2.3
Certificates and approvals
This measurement station has been designed, built and tested for safe operation using
state-of-the-art technology and has left our factory in a safe operational condition. All
necessary and available certificates, test reports and approvals are included (see
section 11 in the ring binder).
CE 4
1
2
3
4
Order Code:
CE4-xxxxxxx
Ser. No.: 123456789B5
Spec.:
30000001/0001
U: 230 VAC
P: 1000 W
HAUSER
87484 Nesselwang / Germany 2003
