multi EA 5100
About this user manual
7
1
About this user manual
The multi EA 5100 analyzer is intended for operation by qualified personnel with the
aid of this user manual.
The user manual contains descriptions of the design and operation of the multi EA 5100
and provides personnel experienced in analysis with the necessary information for the
safe handling of the basic module and its components. The user manual also includes
notes on the maintenance and care of the equipment and potential causes and remedies
for any faults.
Conventions
Instructions for actions which occur in chronological order are numbered and combined
in action units.
Warnings are indicated by a warning triangle and a signal word. The type, source and
consequences of the hazard are stated together with notes on preventing the hazard.
¡
Elements of the control and analysis program are indicated as follows:
¡
Program terms are in bold (e.g., the
System
menu).
¡
Buttons are indicated by square brackets (e.g., [
OK
]).
¡
Menu items are separated by vertical lines (e.g.,
System
|
Device
).
Symbols and signal words used
The operating instructions use the following symbols and signal words to indicate haz-
ards or instructions. The warnings are always placed before an action.
WARNING
Indicates a potentially hazardous situation which can cause death or very serious (possi-
bly permanent) injury.
CAUTION
Indicates a potentially hazardous situation which can cause slight or minor injuries.
NOTICE
Provides information on potential material or environmental damage.
