Safety instructions
multi EA 4000
16
Auxiliary and operating materials as well as their containers may not be disposed in
domestic waste or enter the sewage system or the soil. The applicable regulations
for disposal of these materials must be meticulously observed.
Ensure good room ventilation in working rooms.
2.5.6
Safety instructions: service and repair
The analyzer is usually serviced by the customer service department of Analytik Jena
AG or its authorized and trained specialist personnel.
Independent servicing can maladjust or damaged the analyzer. Therefore, the operator
may generally only carry out the tasks listed in chapter "Maintenance and care", p. 107.
Any service and repair work at the analyzer may usually only be carried out in the
switched-off condition (unless stated otherwise).
Prior to servicing or repair, the energy and gas supplies must be disconnected and
the analyzer must be v vented!
Only use original accessories and original replacement parts from Analytik Jena AG.
The notes in section "Service and care" must be observed.
All protective equipment must be reinstalled correctly immediately after comple-
tion of the service and repair work and be checked for operation!
The exterior of the analyzer may only be cleaned with a damp, not dripping, cloth
after the analyzer has been switched off.
Service tasks and the replacement of system components (removal of the combus-
tion tube, service of the dust trap) must only be carried out after a sufficiently long
cooling down phase.
2.6
Behavior during emergencies
The analyzer must be switched off from the main switch (in the multi EA and its mod-
ules on the equipment back plate) and the power supplies must be disconnected from
the mains in case of dangerous situations or accidents.
Because a rapid response can save lives during an emergency, the following has to be
ensured:
The operating staff must be familiar with the location of safety equipment, acci-
dent and danger alarms as well as first aid and rescue equipment as well as their
handling.
The operator is responsible for the respective training of the operating staff.
All equipment for first aid (first-aid kit, eyewash bottles, stretcher, etc.) as well as
equipment for firefighting (fire extinguishers) must be within reach and easy to ac-
cess. All equipment has to be in a sound condition and should be checked regularly.
Содержание Analytik Jena multi EA 4000
