Endpoint Technology VM-15A, Руководство пользователя

Страница: 17 / 47

18
8.2.4 Duration
Set the punch/beeps duration frames using the GUI ‘duration frames’
up/down control.
8.2.5 Repeat count
Set the punch/beeps repeat count using the GUI ‘repeat count’ up/down
control. For ADR the typical setting is 2 repeats. This is the number of
punch/beeps after the initial punch/beep.
8.2.6 Repeat seconds
Set the punch/beeps repeat seconds using the GUI ‘repeat seconds’
up/down control. For ADR the typical setting is .66 seconds.
8.2.7 Enables
There are individual enable check boxes for punch and beeps.
8.3 Annunciator
§
Select one of the Rehearse/Record/Playback radio buttons to make the
annunciator visible.
§
Move the annunciator window in the GUI positioning graphic to position it. The
size, foreground and background colors may be set in the GUI.
§ The PLAYBACK annunciator inhibits streamers, punches, and text overlay.
8.4 LTC/MTC window
Make a selection the ‘Display’ dropdown or move the LTC/MTC window in the GUI
positioning graphic to make the LTC window visible. The size, foreground and
background colors may be set in the GUI.
8.5 Picture only during cue
‘Picture only during cue’ outputs black when not in the cue. This checkbox works
only when triggering from LTC lists, there is an ‘end’ timecode as the second entry
in the cue, and the annunciator is selected to Rehearse, Record, or Playback.
8.6 Picture when stopped
The ‘Picture when stopped’ checkbox defeats ‘Picture only during cue’ when
stopped.