Endorphines Running order 1U, Руководство пользователя

Страница: 4 / 12

INTRO
Running Order is a two­track trigger sequencer / clock utility in 6 hp. It can be a
precise master clock with zero­jitter clock generation or an incoming clock
manipulate by acting as a divider / multiplier. Punch in your trigger sequences by
either using the 101­style input or in Euclidean mode with a variety of ways to
modulate your patterns both internally and externally. Ability to create tuplets for
odd time signatures makes this the ultimate clock / rhythm mangling utility for your
eurorack system.
Module overview videos with latest firmware features:

https://youtu.be/Sshs6Xl9TZk
 https://youtu.be/I274TTSId_I
 https://youtu.be/MgqLJGTdVm8
CONNECTING THE POWER
Before installing a new module in your case, ensure your power supply has a free
power header and sufficient available capacity to power the module.
Connect the module directly to the power bus­board with supplied 10­16 ribbon
cable like any other eurorack module. Pair of RED / BROWN pins on the multicolor
ribbon cable corresponds to NEGATIVE ­12 VOLTS .
Make sure to align the power cable with the ‘RED/BROWN STRIPE ’ label on the
module that corresponds to ­12V, to the 10­pin connector and with typically a white
line for the 16­pin connector on the bus board.
TECHNICAL SPECIFICATIONS

Width: 6 HP/TE for 3U version, 22 HP for 1U Intellijel format version
 Depth: 30 cm / 1
3
/
16
″
for 3U version, 25 cm / 1
″
for 1U version with inserted ribbon
cable
 Current draw: +12V: 30 mA, ­12V: 10 mA
 CV range: 0…+5V

Triggers output: 0…+10V