endolite AqualimbTT, Инструкция по эксплуатации

Страница: 4 / 68

938255/5-0817
3
Intended life
A local risk assessment should be carried out based upon activity and usage.
Lifting loads
User weight and activity is governed by the stated limits. Load carrying by the user should be
based on a local risk assessment.
Environment
This device is waterproof up to a maximum depth of 1 meter.
To prevent damage or wear, thoroughly rinse this device with fresh water after use in the
following environments:
• Abrasive environments, such as those that contain sand or grit;
• Salt or chlorinated water.
Finish this device to prevent water ingress (see section 7.1). If water enters it, invert it to allow the
water to drain, then leave it to dry.
This device is buoyant. If the user intends to
submerge this device, remove the cosmesis with a
suitable cutting tool (see section 7.1, step 8a).
Take care on wet and slippery surfaces.
Exclusively for use between -15 ˚C and 50 ˚C (5 ˚F and 122 ˚F).
We recommend using Endolite products with this device.
Only competent personnel should carry out maintenance.
Carry out the following maintenance annually:
• Make sure that the socket cap screws are tight. If they are loose, tighten them to the correct
torque setting;
• Make sure that the anti-slip tread functions as intended, and replace if necessary.
Advise the user to report the following changes to the practitioner:
• Changes in body weight;
• Changes in the performance of the device, for example, unusual noises or play.
Cleaning
Use a damp cloth and a mild soap to clean outside surfaces.
Do not
use aggressive cleansers.
This device is a shin-foot unit that comprises a foot shell with an integrated shin. The shin can be
shortened to suit the user’s height. The sole of the foot features an anti-slip tread for grip on wet
surfaces.
3 Function
4 Maintenance
5 Limitations on Use