background image

938321WEB-GB/1-1012

6

Maintenance

Maintenance must be carried out by competent personnel.
It is recommended that the following maintenance is carried out annually:

•  Check the security of the proximal attachment nut and distal alignment bolt.
•  Check for satisfactory function of knee lock and freedom of swing. 
•  Visually check for wear. Some surface damage may occur after a period of use; this 

does not affect the function or strength of the device.

The wearer should be advised:
Any changes in performance of this device must be reported to the practitioner. 
Changes in performance may include:

•  ‘Play’ in moving parts
•  Lock not engaging
•  Instability

Check condition of knee bumper and replace if necessary.

Cleaning:

Use a damp cloth and mild soap to clean outside surfaces, DO NOT use aggressive 

cleansers, wipe dry.

Limitations on use:

Intended life:

Service life of the product is covered by the warranty period - a local risk assessment 

should be carried out based upon activity and usage.

Lifting loads:

User weight and activity is governed by the stated limits.

Load carrying by the user should be based on a local risk assessment.

Environment:

Avoid excessive contact with abrasive environments such as those containing sand for 

example, and rinse thoroughly after any such exposure.
Exclusively for use between -15˚C and 50˚C.
It is recommended that only Endolite products be used in conjunction with the 

product.

Содержание aqualimb TF












Отзывы: