Endo THB-15A, Руководство пользователя

Страница: 21 / 28

Tool Hose Balancer Users Manual
21
CAUTION
Do not supply air before attaching the tool (equipment).

The installation should be performed by a maintenance operator who has
developed sufficient knowledge and operating skill for the balancer.

Attach and remove the tubing fitting while securing the shaft with a tool (21-mm
wrench).
5-1 Preparation and checks before installation
5-1-1 Tools and equipment for installation
All of the following items must be prepared by the customer.

Wrench (21 mm)

Wrench or socket wrench (13 mm)

Support members (metal hangers)

Tubing fitting

Auxiliary wire rope or chain
5-1-2 Check of installation location
Before installing the product, check that the installation location does not have any of the following
problems.
1
Check that the support members have a sufficient strength.
2
Ensure that sufficient space for performing maintenance, including the adjustment of the spring
tension, is available on a side of the main equipment.
3
Ensure that adequate work space is available around the main equipment.
4
Check that the installation location has the installation environment described in “4-3 Operating
environment”.
5
If a trolley is used, attach a carabiner.
6
Check that there are no sharp edges in the installation location.
5-2 Installation procedures
5-2-1 Installation of the Tool Hose Balancer
1
Attach the tubing fitting to the balancer.
2
Attach the supply-side hose to the tubing fitting.
CAUTION
Do not supply air before attaching the tool (equipment).
NOTICE
Loosen the supply-side hose to allow the balancer to move freely.
Tubing fitting
Wrench (21 mm)
Copied
digital
data
from http://www.endo-kogyo.co.jp/