Wood Burning Outdoor Fire Pit
Model No. WAD1024ES
4
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call
1.888.398.8643
toll-free. Please have
your owner’s manual and model number available for
reference.
For Easiest Assembly:
1. Select an area where you will assemble this product. To
protect components, choose a smooth surface that’s free of
cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before
completing each step, go back and fully tighten all hardware.
Be careful not to overtighten. That could damage surfaces or
strip threads.
4. For best results, complete each step in the order presented.
Typical assembly: approximately 30 minutes.
2
Attach First Panel to Base
Place the panel (C) on the base (D) and align the bolt holes
on the Base (D) with the holes on the Panel (C) and insert
bolts (AA) through the Panel and Base and loosely secure
on its place.
Assembly Instructions
3
Attach Remaining Panels to Base
Place the panel (C) on the base (D) matching the align
holes of next panel (C) and Base (D). Keep both panels in
the position as shown in below close up. (the bending part
should always placed inside).
Insert bolts (AA) through matching holes (as shown in
focus view). Fix all Bolts (AA) with Nut (BB) with the help of
screwdriver & wrench as to secure each part on its place.
Repeat the procedure with remaining two panels (C) as to
assemble the fire bowl completely.
4
Assemble the Mesh Cover
Insert the handle through the hole on mesh cover (A)
and tighten with nut (BB ) as to place the handle in right
position.
Carefully place the Mesh Cover (A) on the fire bowl (C). The
fire bowl is ready for use.
o
Insert the handle through the hole on mesh cover (A)
and tighten with nut (BB ) as to place the handle in right position.
o
Place the panel (C) on the base (D) and align the bolt holes
on the Base (D) with the holes on the Panel (C) and insert
bolts (AA) through the Panel and Base and loosely secure
on its place .
Attaching All Panels with Base
Attaching the Panel with Base
c
D
C
AA
BB
AA
D
B
A
A
BB
o
Place the panel (C) on the base (D) matching the align holes of next panel (C)
Repeat the procedure with remaining two panels (C)
as to assemble the fire bowl completely .
and Base (D). Keep both panels in the position as shown in below close up.
o
The fire bowl is ready for use.
o
Carefully place the Mesh Cover (A) on the fire bowl (C).
C
(the bending part should always placed inside).
Insert bolts (AA) through matching holes (as shown in focus view).
o
Fix all Bolts (AA) with Nut (BB) with the help of screwdriver
& wrench as to secure each part on its place.
Close Up
Focus View
o
Insert the handle through the hole on mesh cover (A)
and tighten with nut (BB ) as to place the handle in right position.
o
Place the panel (C) on the base (D) and align the bolt holes
on the Base (D) with the holes on the Panel (C) and insert
bolts (AA) through the Panel and Base and loosely secure
on its place .
Attaching All Panels with Base
Attaching the Panel with Base
c
D
C
AA
BB
AA
D
B
A
A
BB
o
Place the panel (C) on the base (D) matching the align holes of next panel (C)
Repeat the procedure with remaining two panels (C)
as to assemble the fire bowl completely .
and Base (D). Keep both panels in the position as shown in below close up.
o
The fire bowl is ready for use.
o
Carefully place the Mesh Cover (A) on the fire bowl (C).
C
(the bending part should always placed inside).
Insert bolts (AA) through matching holes (as shown in focus view).
o
Fix all Bolts (AA) with Nut (BB) with the help of screwdriver
& wrench as to secure each part on its place.
Close Up
Focus View
o
Insert the handle through the hole on mesh cover (A)
and tighten with nut (BB ) as to place the handle in right position.
o
Place the panel (C) on the base (D) and align the bolt holes
on the Base (D) with the holes on the Panel (C) and insert
bolts (AA) through the Panel and Base and loosely secure
on its place .
Attaching All Panels with Base
Attaching the Panel with Base
c
D
C
AA
BB
AA
D
B
A
A
BB
o
Place the panel (C) on the base (D) matching the align holes of next panel (C)
Repeat the procedure with remaining two panels (C)
as to assemble the fire bowl completely .
and Base (D). Keep both panels in the position as shown in below close up.
o
The fire bowl is ready for use.
o
Carefully place the Mesh Cover (A) on the fire bowl (C).
C
(the bending part should always placed inside).
Insert bolts (AA) through matching holes (as shown in focus view).
o
Fix all Bolts (AA) with Nut (BB) with the help of screwdriver
& wrench as to secure each part on its place.
Close Up
Focus View