Endless Pools Retractable Security Cover, Дополнительное руководство

Страница: 7 / 10

Retractable Security Cover Supplemental Guide
Page 7 of 10
Endless Pools Inc.
D40036-1011
4) When the snap in insert is in place, position the end cap in the track (at the end opposite the roller
mechanism) and position the end guide at the opposite end of the track (same end as the roller
mechanism). Drill a 5/32” hole into the snap in insert and through the end guide and end cap.
Secure a #10 x 1/2” screw into each of the holes.
Rocky Roller Installation
1) Begin by assembling the end roller assembly. Install the 3” diameter PVC pipe into the roller
assembly and position it so that the front edges of the roller assembly stands are a minimum of 3
1
/
2
”
behind the track. Refer to Figure 3 on page 8. The goal is to have the cover fabric leave and enter
the track at a shallow an angle as possible. If you have room, an installation with the roller mounted
below the coping provides for smoother operation (see diagram on page 6). In cases where there is
not enough clearance from the pool wall to the existing wall, a secondary roller may be necessary.
When mounted, the inside edge of the roller assembly will sit 1
1
/
2
” outside of the track. The PVC
pipe may need to be trimmed to create this 1
1
/
2
” space. Secure the roller assembly to the pool
ensuring that it is level and properly spaced in relation to the track. Using the self-drilling screws,
secure the PVC pipe to each hub.
Item # Qty Description
1 2 4” Regular Hub
2 2 Plastic Bushing
3 2 #4 A-Frame
4 2 Plastic Washer
5 1 Small Handle
6 2 5/16” Washer
7 2 5/16”x1” Bolt
8 1 White Knob
5/32" Diameter
#10 x 1/2" SS Screw
5/32" Diameter
#10 x 1/2" SS Screw