Page 11
Operating Instructions
You can modify the programmed schedules by selecting one
(middle
left) lit button and adjusting the schedule using the or buttons.
Press
(middle left) lit button to move between parameters.
You have several possibilities for the schedule (Mon-Fri, weekend, every
day, or single days). The schedules will be repeated every week. The
time and duration are set in 30 minute increments. Once you have set
the schedule, use (top left) lit button to go back. Ensure that you
have selected the desired Water Care option in the main Water Care
menu.
MAINTENANCE
From the Settings page you can
access the Maintenance menu,
which gives you access to the
following options:
• Maintenance reminders
• Standby
Use the or buttons to make
a selection, and
(middle left) lit button to select.
MAINTENANCE REMINDERS
The control panel will remind you
of maintenance required on your
RECSPORT
Recreation System,
like rinsing or cleaning the filter.
Each task has its own duration,
based on normal use.
The Maintenance reminders menu
allows you to verify the time left
before maintenance is required, as well as to reset the time once a task
is completed. Use the or buttons to move through the list.
To reset a task select it by pressing the
(middle left) lit button, then
confirm by pressing the lit button next to confirm when prompted. Once
you have confirmed the task will be reset.
STANDBY
The Standby mode allows you to
service your System. Pumps will stop
for 30 minutes, and automatically
restart after this time. Press
(middle left) lit button to activate
Standby mode.
Once Standby mode has been
activated a screen will appear to
show that pumps are stopped. The normal page will return at the end of
maintenance.
Press on the button next to cancel to leave Standby mode and restart the
RECSPORT
Recreation System.
DATE AND TIME
Here you can adjust the time
format, change the year, date, and
time. Use the or buttons to
choose the setting that you want to
adjust, and select it by pressing
(middle left) lit button.
Use the or buttons to
change the parameters, and
(middle left) lit button to move between parameters. Press
(top left)
lit button to take you back to the main Settings menu.
KEYPAD SETTINGS
In this section, you can change the
temperature unit, language, display
orientation, rim around the control
panel light color, and lock the control
panel.
Use the or buttons to
choose the setting that you want to
adjust. Select it by pressing the
(middle left) lit button then use the or buttons again to change the
setting.
When you change the display orientation, the contextual options and
or buttons adjust to the chosen orientation. The Audio and Setting
buttons remain unchanged, as well as the jets and lights buttons in the
home page.
Security settings allow you a Partial (Temperature) lock or Full (entire
control panel) lock. Select Security screen by pressing the
(middle
left) lit button then use the or buttons to change to Full, Partial or
Unlock. Press
(top left) lit button to display an information screen
telling you to press and hold
button for 5 seconds to lock.
To unlock Full, press and hold
button for 5 seconds.
MISCELLANEOUS
You can turn the Warm weather
mode ON or OFF. When ON
the filtration pump will shut OFF
whenever the water temperature
gets 1°C (2°F) above the set
point. Because of the Recreation
system's large body of water it is
recommended to keep the Warm
weather mode OFF.
Press the
(middle left) lit button, then use the or buttons to
change the Warm weather mode.
You can also hide some information on the home screen by selecting
Hide in "Info messages" (not recommended).
ELECTRICAL CONFIGURATION
Please do not make changes in this section!
ABOUT
This section shows information about the control panel software number,
and the revision numbers of the different components of your system.
SMART WINTER MODE
The Smart Winter Mode (SWM) is used to prevent water from freezing in
the plumbing lines. As soon as there is a risk of freezing, this protection
automatically kicks in. The SWM protection will turn back off only after 24
hours without a risk of freezing. During the SWM period, the Smart
Winter Mode icon remains on; the icon blinks when the purge is active.
The purge period indicates the amount of time between the purging of
the plumbing lines based on the temperature behind the panels.
