4i Edge 313
Quick Start
www.endian.com
Endian Network Account
To activate your Endian Network subscription and keep your appliance
always up-to-date with the latest features and security updates follow these
steps:
A. You already have an Endian Network account
1. When the system asks you if you have an Endian Network account
choose “yes” and go to the next step.
2. Now fill in the form using your data and the activation code on the
back of this page.
B. You do not have an Endian Network account
1. When the system asks you if you have an Endian Network account
choose “no” and go to the next step.
2. Click on the “Endian Network account” link and insert the activa-
tion code on the back of this page.
3. Fill in the registration form and create your account.
4. Close the registration window and go to the next step.
5. Now fill in the form using your data and the activation code.
Your Endian appliance is now ready!
Mapping Table for Reference
COM Port
1
5
8
6
Pin
RS232
RS485
RS422
1
-
A-
TX-
2
RXD
A+
TX+
3
TXD
-
RX+
4
-
-
RX-
5
GND
GND
GND
6
-
-
-
7
RTS
-
-
8
CTS
-
-
9
-
-
-
Digital I/O
1
5
Pin
REF
Description
1
DO_GND
Output digital signal
(0V ground) connected
to the emitter of the
transistor
2
DO
Output digital signal
connected to the
drain of the MOSFET
transistor
3
DO_VDC
Common of the exo-
thermal predrive pow-
er supply (between
+12 et +24 VDC)
4
DI_GND Ground of the input
(isolated)
5
DI
Input digital signal
DIN-Rail Mounting
The metal DIN-rail kit is fixed to the rear panel of the 4i Edge 313.
After opening the product box, mount the 4i Edge 313 on corrosion-free
mounting rails that meet the EN 60715 standard.
Installation
Step 1:
Insert the upper lip of the DIN-rail into the DIN-rail mounting kit.
Step 2:
Press the 4i Edge 313 toward the DIN-rail until it snaps into
place.
Din-Rail
Removal
Step 1:
Gently pushed up from the bottom of the 4i Edge 313.
Step 2:
Slightly pull the 4i Edge 313 forward and lift up to remove
from the DIN-rail.
Din-Rail
4i Edge 313
Quick Start
