Ender 3 Neo, Руководство пользователя, Страница: 15 / 28

4.Install the Printer
4.12 Equipment Wiring
X,E,Z-axis motor port
X-axis limit
switch
6pin (4 wires) 3pin (2 wires)
A1. Follow the yellow label on the 6pin (4 wires) port to connect the X-axis stepper motor;
A2. Follow the yellow label on the 6pin (4 wires) port to connect the E-axis stepper motor;
A3. Follow the yellow label on the 6pin (4 wires) port to connect the Z-axis stepper motor;
B. Follow the yellow label on the 3pin (2 wires) port to connect the X axis limit switch;
C. Connect the mainboard power cable;
D. Connect the display cable.
Caution
●
Please ensure the correct position for the power
supply switch and mains before supply connection
, in order to avoid damage to the device.
●
If the mains between 200V and 240V, please select
the 230V for the power supply switch(default is
230V).
● If the mains between 100V and 120V, please select
the 115V for the power supply switch.
10
Mainboard
power cable
Display cable
E-axis
Z-axis
X-axis
X-axis
A2
A1
A3
B
C
D