20
operation. The E.S. Control can only be re-set after the appliance has cooled
down, and the appliance has been reset. Re-setting of the E.S. Control
proceeds is as follows:
6b.37 Switch off the appliance (Manual On/Off switch) and leave it off for
approximately 10-15 minutes.
6b.38 Remove any obstruction to the fan heater outlet or fan blades etc. Make
sure that the power supply is disconnected with the plug socket outlet while
doing this.
6b.39 Switch on the appliance and the E.S. Control will be re-set.
6b.40 Ensure that the appliance is functioning correctly. If the E.S. Control operates
again, the appliance should be checked by a competent electrician.
WARNING: Before any maintenance or cleaning of the exterior of the fireplace,
the unit should be disconnected from the power supply until it is cool off.
Remote Handset Battery Replacement
7.1 When the batteries are at full power, the battery symbol will show
7.2 When the batteries are half full, the battery symbol will show
7.3 When the batteries are out of power and need replacing immediately, the
battery symbol will show
7.4 Battery replacement is recommended after 1 year. The batteries are 1.5V
alkaline AAA, batteries.
7.5 Dispose of old batteries at an appropriate recycling facility.
7
.
MAINTENANCE