EQUALIZER - TREBLE ADJUST
Treble Adjust
In EQ adjust mode, when source indicator
•
2 is
flashing, the keypad is in treble adjust mode.
The center volume indicator will light, showing a
•
“flat” adjustment for the treble, no treble increase or
decrease.
Use the
•
VOL
▲
and
VOL
▼
buttons
to adjust the treble level. Lit indicators
above the center show more treble.
Lit indicators below the center show
less treble.
EQUALIZER - BALANCE ADJUST
Balance Adjust
In EQ adjust mode, when source indicator
•
3 is
flashing, the keypad is in balance adjust mode.
The center volume indicator will light, showing a
•
“center” adjustment for the balance, no extra left
or right.
Use the
•
VOL
▲
and
VOL
▼
buttons to
adjust the balance. Lit indicators above
the center show more right balance. Lit
indicators below the center show more
left balance.
EQ LOUDNESS OR LIMITER ON & OFF
Loudness On/Off or Limiter/Compressor On/Off
In EQ adjust mode, when source indicator
•
4 is
flashing, the keypad is in loudness setting mode.
In EQ adjust mode, when source indicator
•
L is
flashing, the keypad is in limiter/compressor mode.
Loudness adds extra bass. Limiter/
•
compressor automatically limits volume.
Use the
•
VOL
▲
button to turn the option on
(top volume indicator lights).
Use the
•
VOL
▼
button to turn the option off
(bottom volume indicator lights).
DO NOT DISTURB MODE
Preventing a Keypad from Going Into
Whole-house Mode
Press a keypad’s
•
MUTE button for about
three seconds to prevent the keypad
from allowing whole-house mode.
The keypad will flash to display that if whole-house
•
mode is selected by another keypad, this keypad will
not participate.
To allow whole-house mode for the keypad, press the
•
MUTE button again for about three seconds.
EQUALIZER & AUDIO DYNAMICS
Adjusting the Keypad’s Sound
Press the
•
EQ button to enter equalizer
adjustment mode. Press
EQ again
to exit.
Equalizer adjustment mode automatically exits after
•
30 seconds of keypad inactivity.
The source indicators will light up, then one will flash
•
to indicate that the keypad is in equalizer adjustment
mode.
Use the SOURCE button to cycle
•
through the five adjustment modes.
EQUALIZER - BASS ADJUST
Bass Adjust
In EQ adjust mode, when source indicator
•
1 is
flashing, the keypad is in bass adjust mode.
The center volume indicator will light, showing a “flat”
•
adjustment for the bass, no bass increase or decrease.
Use the
•
VOL
▲
and
VOL
▼
buttons to
adjust the bass level. Lit indicators above
the center show more bass. Lit indicators
below the center show less bass.
Copyright © 2009 Linear LLC
229171 B
MUTE
EQ
SOURCE
VOL
VOL
VOL
VOL
PRINTER’S INSTRUCTIONS:
INSTR,ENC-DRS,QUICK USER - LINEAR P/N: 229171 B - INK: BLACK - MATERIAL: 80 LB. WHITE COATED COVER - SIZE: 5.500” x 2.875” - SCALE: 1-1 - SIDE 2 OF 2
