SKIP MODE (SKIP UP
/SKIP DOWN
)
1. DURING PLAY OR PAUSE MODE, IF SKIP UP BUTTON (22) IS PRESSED IT WILL GO TO NEXT TRACK AND
DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF SKIP DOWN BUTTON (12) IS PRESSED. IT WILL GO BACK TO THE
BEGINNING OF THE TRACK, ORIGIANL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS SKIP DOWN BUTTON (12) AGAIN WILL GO TO THE PREVIOUS TRACK AND
REMAIN THE PLAY OR PAUSE MODE.
SEARCH MODE (SEARCH UP+/SEARCH DOWN
-
)
1. DURING PLAY MODE, IF SKIP UP BUTTON (22) IS PRESSED & HOLD FOR FEW SECONDS, IT WILL START
SEARCHING FORWARD.
2. DURING PLAY MODE, IF “ SKIP DOWN BUTTON (12) IS PRESSED & HOLD FOR FEW SECONDS. IT WILL
STAR SEARCHING BACKWARDS.
REPEAT MODE
PRESS THE “ PLAY MODE ” BUTTON (9) DURING PLAYBACK TO SELECT REPEAT AND RANDOM FUNCTION, A
SINGLE TRACK, ALL THE TRACKS REPEAT AND RANDOM CAN BE PLAYED IN DIFFERENCE MODE AS
FOLLOW:-
FOR CD
(1) REPEAT ALL DICS
(2) REPEAT ONE DISC
(3) REPEAT ONE
(4) OFF MODE
INDICATOR
PLAY MODE
ON LCD DISPLAY
REPEAT ALL DISC
& ALL DISC
REPEAT ONE DISC
& ONE DISC
REPEAT ONE
& ONE
OFF MODE
--------------
CD DISC PROGRAMMING
UP TO 60 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
THE “ CD STOP ” BUTTON (11)
1. SET IN CD MODE & STOP THE CD PLAYBACK.
2. PRESS THE “MEM/CLK-ADJ” BUTTON (8) “ MEMMORY “ WILL APPEAR ON LCD DISPLAY (16) AND
FLASHING.
3. SELECT A DESIRED DISC AND TRACK BY PRESSING DISC 1,2,3 BUTTON (1-3) AND SKIP UP
OR
DOWN
BUTTONS (22,12) DIRECTLY. AND THE POSITION OF MEMORY “ P-01 “ WILL START
FLASHING.
4. PRESS THE “MEM/CLK-ADJ” BUTTON (8) TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD “ PLAY/PAUSE ” BUTTON (21)
TO START PLAYBACK IN ORDER.
7. PRESS “ CD STOP” BUTTON (11) TO STOP PLAYBACK & PRESS AGAIN TO CANCEL ALL STORED
PROGRM, AND “ MEMORY “ INDICATOR WILL DISAPPEAR ON LCD DISPLAY (16).
AFTER PROGRAM COMPLETE, PRESS “ MEM/CLK-ADJ ” BUTTON (8) REPEATEDLY TO REVIEW THE
TRACKS BEING PROGRAMMED.
BLUETOOTH CONNECTING AND PLAYBACK
1.
PRESS THE FUNCTION BUTTON (17) TO SELECT “ BLUETOOTH (BT) ” MODE.
2.
THE LCD DISPLAY WILL FLASHING “BT”, IT MEANS THE BLUETOOTH IN NON CONNECTION /
SEARCHING MODE.
3.
SWITCH ON THE BLUETOOTH FEATURE OF YOUR BLUETOOTH DEVICE(SUCH AS MOBILE PHONE) AND
SELECT “BT9279” BLUETOOTH EQUIPMENT TO CONNECTING.
4.
ONCE THE CONNECTING WAS FINISH AND CONNECT SUCCESSFULLY, THE LCD DISPLAY (16) WILL
CHANGE TO SHOW “BT”.
5.
START TO PLAYBACK YOUR BLUETOOTH DEVICE AND ENJOY THE MUSIC BY THE MAIN UNIT.
6.
TO CONNECT ANOTHER BT DEVICE, PRESS THE AND HOLD THE “ PLAY/PAUSE
” BUTTON (21) TO
DISCONNECT THE EXISTING CONNECTED BT DEVICE, LCD DISPLAY WILL FLASHING “PAIRING” AGAIN,
REPEAT STEP 3 & 4 TO CONNECT ANOTHER BT DEVICE.
USB CHARGING
1. THIS UNIT CAN PROVIDE DC5V/2.1A FOR ANOTHER ELECTRONIC DEVICE CHARGING (SUCH AS MOBILE
PHONE) THROUGH USB PORT (13).
2. USB CHARGING WAS AVAILABLE DURING UNIT IN STANDBY MODE.
REMARK : DUE TO FIRMWARE/SOFTWARE OF MOBILE PHONE WAS VARIOUS AND UPDATE TIME TO TIME,
MAYBE SOME OF MOBILE PHONE CANNOT COMPACTIBLE WITH CHARGING FUNCTION. THIS IS NOT THE
MALFUNCTION.
3
Содержание iTrack BT9279MO
Страница 12: ......
