SOFTWARE INSTALLATION
This section describes how to install the driver and utility for ENCORE 802.11n
Wireless LAN Adapter.
Note: DO NOT install ENCORE 802.11n Wireless LAN Adapter in the computer
until instructed to do so.
Windows 98/ME/2000/XP/Vista Utility and Driver Installation
1)
Insert Driver & Utility CD-ROM and the Auto-run program will appear.
Alternatively, open a file browser and double click on the autorun.exe file
located in the CD directory. In some specific setting on Windows system, you
may need to proceed the software manually, go to your Windows Start menu
and choose
Run
, type “D:\Utility\Vista\Setup.exe” or
“D:\Utility\XP2K\Setup.exe”in the dialog box and click
OK
.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using)
2)
If you need to install the driver manually, refer each Windows OS to the
following CD-Rom directory path: D:\Driver\<Windows OS>.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using).
3)
Click “Install Software (Utility)” to install the driver and software. Select “XP /
2K/ ME / 98” or “Vista” , depending on your operating system, and the install
wizard will begin installing the software. Follow the install wizard instructions
to complete the installation.
-
4
-
