Encore ENPS-2012, Инструкция по эксплуатации, Страница: 28 / 111

The PSAdmin Utility for Windows-based
Refresh
1. Click Reset button just like a picture
＜ ＞
.
2. Refresh searches the network for all attached print
server(s).
Note : Configure the print speed in the Advanced label,
must match the printer’s speed which connect to
the print server. Undependable configuration will
cause printer to abnormal printing.
Multiple Print Queues Configuration
To configure the print server to service multiple print
queues, please follow the instructions listed below:
1. Log into your NetWare file server as a Supervisor
(Admin.) or equivalent.
2. Run the PSAdmin from your Windows.
3. Select the print server and to be configured.
4. Click the Wizard icon in the tool bar.
5. Type in a Print server and a Print Queue Name (For
more detailed information about Wizard , please refer
to the “ Wizard ” section in this chapter).
6. Run the NetWare’s PCONSOLE and create additional
print queues.
7. Select the Print server name you specify in Step 5.
3- 12