Encore PoE Splitter
ENNPOE-S
4
The Front Panel
A
Code
Name
Indication / Function
A
Power-mode
Switch
DC output selections 12V, 9V or 5V by turning the switch to the
left or right. Selected voltage is indicated by the designated
LEDs.
The Rear Panel
Name
Indication / Function
V-OUT port
Voltage output port. The power from the split portion from the PoE/Data
is going to this port. Use this port to power the non-PoE devices such as
Ethernet switch, router, IP camera, etc. Voltage output depends on the
selected voltage switch in the front panel, 5V, 9V or 12V DC.
PoE/DATA port
This port is an input port. This is where the PoE Ethernet cable is
connected to from the PoE PSE (Power Source Equipment) such as a
PoE switch where the network data and power are streaming in one
single Ethernet cable. This port is Giga Ethernet port and compatible
with older 10 and 100Mbps Ethernet.
DATA port
This port is an output port. This is where the network data is receiving
and transmitting from the split PoE/Data input port, there is no PoE
power from this port but purely network data only. Connect this port to
the non-PoE Ethernet network switch or hub, IP camera or any non-PoE
devices for 10/100/1000 Mbps data speed.
Содержание ENNPOE-S
Страница 1: ...Encore PoE Splitter ENNPOE S 1...