![background image](http://html1.mh-extra.com/html/encore/enlga-1320/enlga-1320_manual_2406274002.webp)
1. Introduction
Thanks for the purchasing of your new Gigabit Ethernet PCI
adapter. This document describes the Installation of network
adapter. This adapter supports 10BASE-T, 100BASE-TX and
1000BASE-T Ethernet copper interface. Moreover, the PCI
interface on the Gigabit Ethernet NIC complies with PCI Local
Bus, is compatible with 32-bit PCI bus. As a bus master, the
NIC requests access to the PCI bus, instead of waiting to be
polled.
1.1 Features
The Gigabit Ethernet PCI adapter is a cost effective,
high-performance network interface card. It operates in
10BASE-T, 100BASE-TX and 1000BASE-T modes and
integrates easily with Fast Ethernet hub and Gigabit hub and
switch.
Complies with IEEE 802.3 10BASE-T standard
Complies with IEEE 802.3u 100BASE-TX standard
Complies with IEEE 802.3ab 1000BASE-T standard
Complies with PCI specifications
Supports 32 bit bus master for high throughput and low
CPU utilization
Supports both half and full duplex operation
Supports 10/100/1000Mbps auto-sensing capability
Supports Wake-On-LAN (depend on model and user’s
motherboard function)
Rich diagnostic LED mounted on bracket for easily
viewing and troubleshooting
Plug and Play Installation.
Network drivers on the diskette for Windows 98SE,
NT4.0, 2000, XP, ME, Netware 4/5/6.X, and Linux driver.
FCC, CE class B certification
1
LED Function
10M Link/Act
Green/Blinking Green
100M Link/Act Green/Blinking Green
1000M Link/Act Green/Blinking Green